Brief description

The machine is used for the direct rough pulping of waste paper, rice and wheat grass, common residue, reed, wood chip, bamboo chip, cotton stalk, corn stalk, wood shavings, sawdust, wood chips, wood chips, wood strips, hemp, crotch, shrubs and other raw materials, which can be processed into velvet fiber. When cooked, used for...

Detailed introduction

The machine is used for the direct rough pulping of waste paper, rice and wheat grass, common residue, reed, wood chip, bamboo chip, cotton stalk, corn stalk, wood shavings, sawdust, wood chips, wood chips, wood strips, hemp, crotch, shrubs and other raw materials, which can be processed into velvet fiber. Cooking, used for preimmersion, can increase the amount of balls, shorten cooking time, reduce the dosage of chemicals. Or using the raw materials after pretreatment through this machine, with high concentration grinding and refining machine can be made of different pulp standards of total chemical native color pulp, total chemical bleached pulp, semi-chemical mechanical pulp, cold method of high yield mechanical pulp. Using this machine to make mechanical pulp, no waste water discharge in the production process, to achieve clean production.

The twin-rod rubbing machine is composed of feeding part, pulping part, bearing seat part, reducer part, distribution transmission part, motor six parts.

Installation Instructions for Double Rub Mill Splitter

1. The twin-roll rubbing machine has passed the air inspection before leaving the factory, and then it is packed and left the factory.

2. The installation of the foundation plate adopts the construction method of secondary alignment and secondary grouting to achieve the requirements of installation precision.

3. When installing, the main engine auxiliary machine must be aligned with the coupling, and the deviation should not be greater than 0.5mm.

4. Before starting the machine, check whether the lubrication points are reliable and add lubricating oil as required.

Matters needing attention for double-stick rubbing and splitting machine

1. It is strictly prohibited for stones and iron to enter the machine. If found, it should be stopped immediately and cleaned before starting up.

2, uniform feeding, too easy to bet race, motor do not exceed the rated current.

Scope of use

Is mainly used for rice and wheat grass, reed, wood, bamboo, bagasse, cotton stalk, corn stalk, agrimony etc.canbe fasten, hemp, shrubs, brushwood, direct coarse grinding of raw materials such as wood chips, wood, can be directly coarse on Monday, can be directly to the raw material processing into fiber velvet (slender fibrosis), high consistency pulping decrease fiber cutting, squeeze the fiber cell wall split, accelerate the liquid penetration.