Brief description

Vertical high-energy hydraulic pulper is designed according to the principle of hydraulic whirlpool. The rotor adopts the mechanism of double helix and flying force. When the rotor rotates, the high thick slurry moves in the warp direction to promote the abolition of accelerated hydration and transportation. In the course of operation, waste...

Detailed introduction

Vertical high-energy hydraulic pulper is designed according to the principle of hydraulic whirlpool. The rotor adopts the mechanism of double helix and flying force. When the rotor rotates, the high thick slurry moves in the warp direction to promote the abolition of accelerated hydration and transportation. In the process of operation, the waste paper is always in the state of high density into the fiber, so that the friction between the fiber and the fiber, easy to ink particles and chemical additives and fiber separation, in order to achieve the purpose of recycling. In addition, the blade of the rotor is an oblique helix. The shearing effect is weak, and the impurities in the waste paper can only be peeled off for use, and will not form small chips, which creates favorable conditions for sizing screening. The structure design is novel, reasonable, high pulp concentration. With the characteristics of energy saving, water saving and small footprint, it is an ideal waste paper recycling equipment.

Vertical high concentration hydraulic pulper is mainly composed of tank, impeller, rotor, sieve plate, column and so on. The main breaking mechanism is impeller and rotor. When the impeller and the rotor rotates, high consistency pulp for radial motion, at the same time under the two ends of the rotor helical vane rotary motion, the axial reaction on the side of the tub, hydration, waste paper in the tub is accelerating organization because of the waste paper pulp in the tub is in high energy condition, through the impeller and two head screw vane axial and radial motion, fiber friction each other, separate the ink particles and fibers. In addition, due to the rotor and spiral blade before the cutting point is weak, on the waste paper in the light impurities (such as plastic film) only play a peeling effect, will not form drunk dust, for the screening of slurry.