Brief description

Drum type high concentration pulper is based on the introduction of similar foreign products improved design, it has low energy consumption, only for the traditional high concentration of hydraulic pulper 1/5 below; The damage to the fiber is minimal and does not damage the impurity and other advantages. Is a variety of high and low concentrated hydraulic pulp...

Detailed introduction

1. Product introduction

Drum type high concentration pulper is based on the introduction of similar foreign products improved design, it has low energy consumption, only for the traditional high concentration of hydraulic pulper 1/5 below; The damage to the fiber is minimal and does not damage the impurity and other advantages. Is a variety of high and low density hydraulic pulper used to deal with a variety of waste paper replacement products.

2. Working principle

Waste paper together with water and chemicals into the pulper, waste paper here is soaked in water and through the rotation of the drum so that the waste paper reciprocately fell from high to the hard bottom surface of the drum, can effectively break the waste paper into fibers without breaking the impurities, this impurity is easy to be removed in the subsequent purification system. The treated pulp is transported to the sizing roughing machine through the receiving trough.

3. Main features

(1), the roller type high concentration pulper can effectively relieve the fiber without excessively damaging the fiber.

(2) There is no need to consume energy in unnecessary mixing, cutting off fibers and impurities, and the energy consumption is only consumed in the rotation of the cylinder, so each ton of pulp only consumes 15-20kW •h.

(3) After all the waste debris that cannot pass through the sieve is discharged from the other end of the cylinder, there is no need for further fiber recovery.

(4), the drum type high concentration pulper is very suitable for processing low grade and difficult to dispose of waste paper, such as household mixed waste paper, without machine pulp office waste paper and liquid packaging cardboard recycling, waste paper can be used in the pulping system without picking.

4. Main specifications and parameters

Note: No-load refers to the no-load mass of the equipment; Bulk density refers to the load of equipment (containing waste paper) quality