Brief description

High-speed slurry washing machine through the slurry box into the polyester mesh and the chest roll between the crevice, the chest roll drives the net and the volt roll high speed operation, the slurry at the chest roll received the net and the chest roll extrusion pressure and high speed operation of the centrifugal force, so that the slurry can be removed...

 Detailed introduction

High-speed pulp washing machine through flow slurry tank slurry into the cracks between polyester mesh and chest roller, breast roll drive the net and v roll high-speed operation, paste in breast roll received the net with breast roll extrusion and high speed for the combined action of centrifugal force to dehydration and paste lotion, slurry along with the network reached coucher, again by the net and v roll extrusion and centrifugal force role further dehydration, The pulp is then scraped into the discharge screw from the bottom roller by the scraper. In the above process, because the pulp layer between the net and the roller is very thick, so the ink particles in the pulp, filler and other fine impurities in the process of stripping by the blocking effect from the pulp layer is very small, and it is easy to come out with the water.

The main features of high-speed slurry washing machine:

1. High removal efficiency of impurities

The material layer between the polyester net and the roller is very thin, and the impurities in the pulp escape stroke is short. In the process of escape, the obstruction from the pulp layer is small, coupled with the centrifugal force generated by high speed operation, it is easy to escape the fine impurities such as fillers and ink particles, and the ash removal rate of the pulp after washing is more than 99%.

2. Dehydration efficiency

The extremely thin pulp layer and higher centrifugal force are not only conducive to the removal of fine impurities, but also conducive to the removal of water. The equipment has a lower pulp concentration and a higher pulp concentration to be washed slurry dehydration rate of more than 90%.

3. The quality of slurry is uniform after washing

The low slurry concentration and the uniform distribution of the slurry system make the slurry uniformly distributed in any direction. In addition, the constant extrusion pressure and centrifugal force in the dehydration process make the slurry always have uniform dehydration power, so that the slurry quality is uniform and stable.

4. Small footprint and low installation cost

Although the thickness of the material layer is very small, the high speed of the equipment determines that the production intensity per unit area is quite high. Therefore, the same production capacity will occupy a much smaller area.

5. Small power consumption and low installation cost

The equipment of dehydration power from net roll extrusion and high speed centrifugal force, don't need additional pressure vacuum suction, etc, compared with horizontal belt type pulp washing machine, eliminating the vacuum pump, reduces the power consumption, compared with the vacuum pulp washing machine, reduces the cost of installation, and the article to wash the dehydration effect is any device, including both are much better.

6. Easy to operate and save manpower

The equipment is highly automated, normal operation, without manual operation. The polyester net with guide bar saves the risk of the net running off, and the well-designed cantilever type network changing structure makes the network changing operation simpler and faster, saves trouble and effort, and improves the use efficiency of the equipment.

7 clean environment, safe operation

Fully enclosed structure design, so that the water and slurry after dehydration are all concentrated in the equipment after unified discharge; Without any influence on the external ring, the working environment is kept clean, and the high-speed parts are completely isolated from the operators, thus eliminating the hidden danger of safety.